Sealant - Deery 101ELT - Hot Applied

Sealant - Deery 101ELT - Hot Applied

DESCRIPTION

DEERY 101ELT is an extra low modulus, low resilience, hot applied, single component, elastically modified composition of asphalt cement, virgin synthetic polymer, premium rubber, and other modifiers. The sealant contains no solvent, is pre-reacted and conforms to the requirements of various cold temperature specifications. Material is tested for low temperature performance at -20?øF (-29?øC) using 200% extension. VOC=0 g/l.

USE

DEERY 101ELT is a low viscosity pavement preservation sealant intended for highway, street and aviation applications for sealing transverse joints and random transverse cracks in Asphalt or Concrete pavements where low resilience side wall force is desired. Properly installed, DEERY 101ELT is an effective barrier against damage from debris and moisture infiltration into cracks and joints within regions experiencing moderate high and very low pavement temperatures. Not recommended for use in parking lots or areas frequented by foot traffic.

HEATING and APPLICATION

Sealant shall be heated in a hot-oil jacketed melter capable of constant mechanical agitation and equipped with a calibrated thermometer to monitor sealant temperature. Material shall be heated to and maintained at the Recommended Application Temperature during use. Material can be cooled and then reheated, but only if prolonged heating is avoided. Prolonged heating at or above Recommended Application Temperature may severely damage product. If overheating damage occurs, immediately drain machine completely and refill with new material. DEERY 101ELT is pre-reacted and can be applied immediately after heating to Recommended Application Temperature. With pavement temperature at 40?øF (4?øC) or higher, place material into clean, dry crack or prepared reservoir by means of a hand-held pour pot, wheeled push bander or wand applicator. Squeegee any excess sealant tight to pavement surface. Excessive over-banding should be avoided. Pavement may be warmed to 40?øF (4?øC) or higher with a Hot Air Lance. For more details on heating and application, refer to the Installation Instructions- Hot Applied Sealant sheet which is included with each pallet of product. Specific Gravity of DEERY 101ELT sealant is 1.17.